Scubapro Litehawk
BCD
Brand
Model
- Litehawk
Model Evolution
Predecessor
Earlier model
Successor
Newer model that offers advancements in technology, features, and performance over the previous version
Production
Years manufactured
General
BCD type
Jacket, Backplate and Wing, Back-Inflate BCD
- Back Inflation Wing Style
Lifting capacity
The maximum amount of weight it can balance when it's fully filled with air, basically how much weight is needed to make a fully inflated BCD sink underwater.
- 29.2 lb
- 13.24 kg (converted)
Weight of BCD
- 5.3 lb
- 2.4 kg (converted)
Suitable for travelling (lightweight)
- Yes
Appearance/physical characteristics
Material
BCD material
- 420 Denier Nylon
Colors
- Black/Blue
Gender
Female, male or unisex
- Unisex
Size
Different sizes of BCD
- XS/S
- M/L
- XL/XXL
Straps and D-Rings
Tank attachment system
Traditional Nylon Strap with Buckle, GripLock tank band, Quick-Release Buckles, Slide and Lock System etc.
- Traditional Nylon Strap with Buckle
Tank valve strap
Secondary strap used to secure the upper part of the scuba tank (near the valve).
- Yes
D-Rings total number
Ring shaped like the letter "D," used as an attachment point for various diving accessories
- 4
Plastic D-Rings number
- 0
Stainless steel D-Rings number
- 4
Knife attachment
- No
Pockets and weights
Weight pockets for integrated buoyancy control, an octopus pocket for secure and accessible regulator storage, accessory pockets for small gear, and trim weight pockets to optimize divers' horizontal positioning and buoyancy underwater.
Weight pockets number
Pockets where divers can insert and secure weights for buoyancy control during a dive.
- 2
Ditchable weight pockets
- Yes
Ditchable weight
- 12 lb
- 5.44 kg (converted)
Non-ditchable weight pockets
Pockets where divers can insert and secure removable weights for buoyancy control during a dive.
- Yes
Non-ditchable weight
- 5 lb
- 2.27 kg (converted)
Number of octopus pockets
- 0
Accessories pockets
- 0
Accessories pockets placement
- Not applicable
Inflator & dump valves
Inflator allows to add air to the BCD's air bladder. Dump valve releases air from the bladder.
Inflator
Inflator type/name
- Scubapro Balanced Power Inflator
Inflator hose length
Dump valves number
- 2
Dump valves placement
- Right Lower Rear & Right Shoulder
Oral inflation
- Yes
Recalls
Recalled
- No
Recalled models/variants
Recall reason
Manual
Description
Decription provided by the manufacturer (facts, technical description)
- LITEHAWK is the lightest version possible being just a light harness with a bladder. Holding system for the rear bag with additional elastic bands that make it possible to keep it basically covered b... More
Product No
Do you have information to improve this product page?
