Aqualung Pearl i3 (2007)
BCD
Brand
Model
- Pearl i3
Model Evolution
Predecessor
Earlier model
- Not applicable
Successor
Newer model that offers advancements in technology, features, and performance over the previous version
Production
Years manufactured
General
BCD type
Jacket, Backplate and Wing, Back-Inflate BCD
- Wrap-Around Jacket Design
Lifting capacity
The maximum amount of weight it can balance when it's fully filled with air, basically how much weight is needed to make a fully inflated BCD sink underwater.
Weight of BCD
Suitable for travelling (lightweight)
- No
Appearance/physical characteristics
Material
BCD material
Colors
- Black / Twilight
- Black / Aqua
- Black / Pink
Gender
Female, male or unisex
- Female
Size
Different sizes of BCD
Straps and D-Rings
Tank attachment system
Traditional Nylon Strap with Buckle, GripLock tank band, Quick-Release Buckles, Slide and Lock System etc.
- Traditional Nylon Strap with Buckle
Tank valve strap
Secondary strap used to secure the upper part of the scuba tank (near the valve).
- Yes
D-Rings total number
Ring shaped like the letter "D," used as an attachment point for various diving accessories
- 4
Plastic D-Rings number
- 0
Stainless steel D-Rings number
- 4
Knife attachment
- Yes
Pockets and weights
Weight pockets for integrated buoyancy control, an octopus pocket for secure and accessible regulator storage, accessory pockets for small gear, and trim weight pockets to optimize divers' horizontal positioning and buoyancy underwater.
Weight pockets number
Pockets where divers can insert and secure weights for buoyancy control during a dive.
- 4
Ditchable weight pockets
- Yes
Ditchable weight
- 20 lb
- 9.07 kg (converted)
Non-ditchable weight pockets
Pockets where divers can insert and secure removable weights for buoyancy control during a dive.
- Yes
Non-ditchable weight
- 5 lb
- 2.27 kg (converted)
Number of octopus pockets
- 1
Accessories pockets
- 2
Accessories pockets placement
- O Right side (Zippered) & one hideaway pocket on the left side of the BC, located under the i3 Control Unit.
Inflator & dump valves
Inflator allows to add air to the BCD's air bladder. Dump valve releases air from the bladder.
Inflator
Inflator type/name
- i3 Controller
Inflator hose length
- 27 in
- 68.58 cm (converted)
- 22 in
- 55.88 cm (converted)
Dump valves number
- 2
Dump valves placement
- Right Lower Rear & Right Shoulder
Oral inflation
- Yes
Recalls
Recalled
Recalled models/variants
Recall reason
Description
Decription provided by the manufacturer (facts, technical description)
- Integrated i3 controller for easier, single touch control for both inflation and deflation. Multiple dump features allows upper and lower dumps to activate simultaneously when depressing the i3 lever... More
Product No
Do you have information to improve this product page?